Get a Seat Track Quote

Direct wholesale pricing, fast response.
Interior Structure

The Best Way to Buy Used Front Seat Tracks Online

Is your seat rocking, stuck, or twisting when you try to move it? We offer fully tested, straight OEM front seat track assemblies with motors included. Fast shipping across New Jersey and nationwide.

Smooth Sliding

Rollers and rails are verified to move freely without binding or grinding.

Straightness Checked

Metal frames are inspected to ensure they are not bent from previous impacts.

Close up of a tested OEM used power front seat track lower assembly

Quality Used Seat Track Assemblies You Can Trust

The seat track is the heavy metal framework that bolts your seat to the floorboard. Over time, spilled drinks, rust, stripped motor gears, or a snapped drive cable can leave you stuck in an uncomfortable driving position. At Falcon Car Parts, we provide genuine used front seat tracks that restore your vehicle's interior adjustability.

Every used lower seat frame in our inventory is carefully removed and tested on a bench. If it is a power track, we apply 12V to ensure all integrated motors (forward/back, up/down, tilt) run the rails flawlessly without hesitation.

  • Motor & Cable Check: Ensuring power tracks drive evenly on both sides without twisting.
  • Manual Lever Test: Verifying the release bar on manual tracks securely locks the teeth into the rail slots.
  • Structural Integrity: Rejecting frames with bent mounting feet or twisted crossbars.

Fast Delivery for Used Seat Tracks in NJ

Located in Clifton, NJ, Falcon Car Parts is perfectly positioned to provide rapid shipping for used interior seat frames in New Jersey. Seat tracks are long, awkward, and heavy pieces of metal; we use specialized reinforced boxes to ensure the mounting feet aren't bent during transit.

From Jersey City to Newark and beyond, we are the Tri-State area's trusted source for reliable, bench-tested OEM seat components.

Heavy-Duty Packaging

Packed securely to prevent bending the floor mounting brackets!

Front Seat Tracks for Every Vehicle Configuration

Whether you have a basic manual slider or an advanced 8-way power frame, we have the exact OEM replacement.

Manual Seat Tracks

Standard pull-bar sliding rails found in base models, older vehicles, and passenger sides of mid-tier trims.

Power Seat Tracks

Complete lower frames with integrated motors and drive cables for 4-way, 6-way, or 8-way electronic adjustment.

Driver & Passenger Sides

Specific left and right assemblies, ensuring the mounting feet match the exact contour of your floor pan.

Our 6-Point Quality Check for Seat Tracks

A rocking or stuck seat is a major driving hazard. Every used seat track sold by Falcon Car passes the following standards:

  • 1. Frame Straightness: We inspect the long steel rails and crossbars to ensure they are parallel and not bent from an accident.
  • 2. Power Motor Spin: For power tracks, we apply 12V to ensure the motors drive the worm gears in all directions without grinding.
  • 3. Drive Cable Integrity: We verify that the flexible square cables connecting the motors to the side rails are unbroken.
  • 4. Manual Latch Engagement: For manual tracks, we ensure the metal teeth lock firmly into the slots to prevent unexpected sliding.
  • 5. Rust & Debris Check: Heavy rust or pet hair buildup in the rail channels is cleaned to prevent the nylon rollers from binding.
  • 6. Connector Pin Review: We inspect the electrical pigtails on the motors to ensure pins are clean and ready for a plug-and-play install.

Common Questions About Buying Used Seat Tracks

Used front seat tracks typically cost between $75 and $250. Prices vary significantly depending on whether the track is a simple manual slider or a complex power track with multiple integrated motors.

Yes. If your vehicle originally came with a power seat, the replacement seat track assembly we provide will include the integrated forward/backward, tilt, and height motors attached to the rails.

Common signs of a bad track include the seat rocking back and forth when accelerating/braking, the seat getting stuck halfway on the slider, or the metal rails being physically bent from a prior collision.

Seat tracks are sold as a complete lower framework (both left and right rails connected by crossbars) because they are riveted and calibrated as a single unit at the factory.

While physically possible to bolt the track to the floor, it requires extensive custom wiring, adding switches, and tying into the vehicle's body control module. We recommend replacing like-for-like.

Usually, the memory computer module is a separate electronic box bolted under the seat. The seat track is the mechanical metal frame and motors. Modules are typically sold separately.

Yes. Severe rust can cause the internal rollers to bind and the motors to burn out. We reject any seat tracks with heavy oxidation, ensuring you receive smooth-sliding metal rails.

It is a moderate DIY job. It requires unbolting the 4 main floor bolts, removing the seat from the car, and then unbolting the upper seat cushion and backrest from the old track to move onto the new one.

This occurs when the internal drive cable snaps on one side of the track. The motor only pushes one rail, causing the seat to twist. Replacing the full seat track assembly fixes this.

Because we operate out of Clifton, NJ, we provide incredibly fast 1-2 day delivery for local Tri-State area customers, allowing you to fix your driving position quickly.