Get a Seat Motor Quote

Direct wholesale pricing, fast response.
Interior Electrical

The Best Way to Buy Used Seat Motors Online

Is your power seat stuck in an uncomfortable position? We offer fully tested, OEM-quality power seat motors, drive cables, and complete seat track assemblies. Fast shipping across New Jersey and nationwide.

Bench Tested

Motors are powered up to ensure smooth gear operation in all directions.

Tracks Inspected

Full assemblies are checked for straight rails and un-seized rollers.

Close up of a tested OEM used power seat motor and track assembly

Quality Used Power Seat Motors You Can Trust

A failed power seat motor can leave you stuck too close to the steering wheel or unable to recline. Replacing a burnt-out motor or a stripped drive gear doesn't mean you need to buy a whole new seat from the dealership. At Falcon Car Parts, we provide genuine used power seat motors and tracks that restore your comfort and driving position.

Every used seat motor assembly in our inventory is carefully removed from the seat frame. We test the forward/backward drive motors, the height adjustment motors, and the recline mechanisms to ensure they operate flawlessly under load.

  • Voltage Test: Applying 12V to verify strong, consistent motor rotation without hesitation.
  • Gear Inspection: Ensuring plastic worm gears and flexible drive cables are not stripped.
  • Track Alignment: For full assemblies, verifying the metal rails slide smoothly without binding.

Fast Delivery for Used Seat Motors in NJ

Located in Clifton, NJ, Falcon Car Parts is perfectly positioned to provide rapid shipping for used seat track assemblies in New Jersey. Driving with a seat stuck in the wrong position is unsafe and uncomfortable; we prioritize getting these functional interior parts to your mechanic fast.

From Jersey City to Newark and beyond, we are the Tri-State area's trusted source for reliable, bench-tested OEM interior electrical parts.

Careful Packaging

Packed securely to protect fragile electrical connectors and drive cables!

Seat Components for Every Need

Whether you just need one specific motor or an entirely new lower frame, we have the OEM parts to fix it.

Individual Seat Motors

Specific motors for Forward/Back, Front Tilt, Rear Tilt, or Recline functions (if removable).

Complete Seat Tracks

The entire lower metal framework with all motors pre-installed. The easiest bolt-on solution for major failures.

Lumbar Actuators

Specialized motors built into the seat back that control the inflation or movement of lower back support.

Our 6-Point Quality Check for Seat Motors

You need your seat to move reliably every time. Every used power seat part sold by Falcon Car passes the following standards:

  • 1. Bi-Directional Power Test: We run the motor forwards and backwards to ensure internal brushes aren't burnt out.
  • 2. Acoustic Check: We listen for grinding, popping, or loud whining which indicates failing internal gears.
  • 3. Drive Cable Inspection: We verify that the flexible square cables connecting the motor to the track are unbroken.
  • 4. Connector Integrity: We inspect the electrical pigtails to ensure pins are clean and not melted from a short circuit.
  • 5. Track Straightness: If selling the full assembly, we ensure the metal rails aren't bent from a previous collision.
  • 6. Thread Spool Check: We ensure the long threaded rods that actually move the seat are clear of debris and not stripped.

Common Questions About Buying Used Seat Motors

Used power seat motors typically cost between $75 and $250. Prices vary significantly based on whether you are buying a single replacement motor or an entire lower seat track assembly with multiple motors attached.

If you press the seat switch and hear a clicking or humming sound but the seat doesn't move, the motor gears are likely stripped. If you hear absolutely nothing, it could be a blown fuse, a bad switch, or a dead motor.

We sell both! Depending on the vehicle, some motors can be unbolted individually. For other vehicles where the motors are riveted in, we sell the entire lower metal seat track assembly complete with all motors.

Yes. We apply 12V power directly to the motor pins to ensure it drives the worm gear smoothly in both directions without grinding, hesitation, or overheating.

It is a moderate DIY job. You generally have to unbolt the entire seat from the floor floorboard, lean it back or remove it from the car, and then access the underside to unbolt the motor or track.

This refers to the number of directions the seat can move. A 6-way seat moves forward/back, up/down, and tilts front/rear. An 8-way usually adds a power-reclining backrest.

Usually, the memory seat control module is a separate electronic box mounted under the seat. Unless specified in your quote, we sell the mechanical motors/tracks separately from the computer modules.

This happens when the flexible drive cable that connects the single motor to both sides of the seat track snaps or strips out on one side, causing the seat to twist when you try to move it.

Yes. If you are purchasing the full track assembly, we inspect the metal rails to ensure they are perfectly straight and free of severe rust that could cause the rollers to bind.

Because we operate out of Clifton, NJ, we provide incredibly fast 1-2 day delivery for Tri-State area customers, allowing you to quickly fix your driving position.