Rear Knuckle Quote

OEM suspension hubs, tested and ready.
Inspected Suspension Components

Restore Stability with Used OEM Rear Knuckles

Avoid expensive dealership prices. We provide structurally sound, precision-inspected rear suspension knuckles and spindle assemblies that guarantee perfect wheel alignment. Fast shipping across NJ and nationwide.

Alignment Guaranteed

Every knuckle is checked for trueness to ensure your vehicle meets factory alignment specs.

Impact Tested

We only ship units free of cracks, bends, or structural stress from donor vehicles.

High quality used rear knuckle assembly with hub and spindle

Precision-Matched Rear Spindle Assemblies

A bent rear knuckle can cause irreversible tire wear and dangerous handling. At Falcon Car Parts, we supply genuine used rear knuckles that maintain the structural integrity of your vehicle's suspension. Don't risk your safety with low-grade aftermarket castings.

Every used rear hub carrier in our inventory is sourced from low-mileage vehicles. Our suspension experts inspect every mounting point and bore to ensure no ovaling or thread damage exists, providing you with a reliable bolt-on solution.

  • Structural Integrity: Units are magnafluxed or visually audited for stress fractures.
  • VIN Verified: We ensure ABS sensor and drivetrain compatibility via VIN matching.
  • Rust Protection: Units from harsh climates are rejected to ensure clean mounting surfaces.

Fastest Turnaround for Rear Knuckles in NJ

Located in Clifton, NJ, Falcon Car Parts is your primary source for used suspension parts in New Jersey. We understand that suspension repairs are urgent for vehicle safety, which is why we offer local same-day pickup and overnight NJ shipping.

Proudly serving mechanical shops and DIYers in Newark, Jersey City, Elizabeth, and across the state.

Ready for Install

Cleaned and inspected hubs for immediate suspension restoration!

Rear Knuckles for All Suspension Types

Whether you have independent rear suspension or a solid axle setup, we stock knuckles for every configuration.

Multi-Link Knuckles

Complex aluminum or steel knuckles for modern independent rear suspension (IRS) systems.

Rear Hub Carriers

Heavy-duty assemblies that integrate the wheel hub and brake mounting points for SUVs and Trucks.

Spindle Assemblies

Precision-machined spindles for traditional bearing-and-race configurations.

Our 6-Point Suspension Quality Audit

Your safety depends on the strength of your knuckle. Every used unit passes a strict quality control process:

  • 1. Trueness Test: We verify the knuckle isn't bent to ensure correct camber and toe settings.
  • 2. Thread Integrity: Every caliper and link mounting bolt-hole is inspected for stripped threads.
  • 3. Bearing Audit: We check for excessive play or noise in the integrated hub assembly.
  • 4. ABS Port Check: We ensure the sensor hole is clean and the mounting tab is intact.
  • 5. Bushing Inspection: Control arm mounting points are checked for ovaling or excessive wear.
  • 6. Corrosion Audit: We reject units with heavy scaling that could interfere with safe mounting.

Rear Knuckle FAQ

The cost of a used rear knuckle typically ranges from $100 to $350. Prices vary based on the vehicle's make and model, and whether the unit includes the wheel hub, bearing, or ABS sensor.

OEM knuckles are forged or cast to precise factory standards. Aftermarket knuckles often use inferior alloys that may not withstand lateral forces, potentially compromising your vehicle's safety and suspension geometry.

Most used rear knuckles are sold as assemblies including the hub and bearing. While we inspect the bearing for smoothness, we guarantee the knuckle housing itself; bearings are wear items.

If your vehicle cannot be aligned to factory specs, or if you notice uneven tire wear and 'dog-tracking' after a curb impact, the knuckle is likely bent and requires replacement.

We only salvage knuckles from vehicles that have not sustained localized suspension damage. Every unit undergoes a rigorous structural integrity check to ensure it is crack-free.

A knuckle is the housing connecting suspension links. A spindle is the specific shaft upon which the wheel hub and bearings rotate; they are often integrated into one unit.

Most assemblies include the ABS sensor. However, we recommend swapping your original sensor if the harness connectors do not match, as sensors are highly trim-specific.

Yes. We inspect all mounting 'eyes' and bores for ovaling. If the knuckle uses integrated bushings, we check them for dry rot, though new bushings are always recommended.

Suspension parts vary by drivetrain. We use your VIN to cross-reference the exact casting number required for your specific vehicle configuration.

NJ residents receive 1-day shipping from our Clifton warehouse. Local pickup is also available for those needing to complete a suspension repair immediately.