Get a Rear Axle Quote

Direct wholesale pricing, fast response.
Drivetrain Components

The Best Way to Buy Rear Axle Assemblies

Searching for a "RWD rear end near me"? We provide tested, OEM-quality complete rear axle assemblies delivered directly to your shop in New Jersey and nationwide.

Ratio Verified

100% VIN-matched gear ratios for your vehicle.

Spin Tested

Guaranteed quiet operation and smooth bearings.

Quality inspection of a used OEM rear axle assembly

Trusted Source for Complete Rear Ends

A damaged rear axle can cause severe vibration and leave you stranded. Falcon Car Parts is the industry leader for used RWD rear axle assemblies for sale, providing meticulously audited OEM units that restore power to your wheels with factory-spec reliability.

Every used rear end in our inventory undergoes a structural audit to ensure the housing is perfectly straight. We inspect the pinion yoke, axle shafts, and differential gears for any signs of fatigue before clearing the unit for shipping.

  • Bearing Audit: Verified silent operation under rotational load.
  • OEM Quality: Genuine manufacturer parts from 1950 to 2026.
  • Leak Inspection: Every unit is checked for pinion and axle seal integrity.

Looking for Used Rear Axles Near NJ?

Based in Clifton, New Jersey, Falcon Car Parts provides the fastest delivery times for used RWD rear ends in NJ and the surrounding Tri-State area. Whether you are in Newark, Jersey City, or Paterson, we offer specialized local support and rapid freight shipping.

Skip the expensive dealership markup—get a certified, high-performance OEM axle assembly with a nationwide warranty right here.

NJ Local Pickup

Save on freight by picking up in Clifton!

We Stock Rear Ends for All Applications

From standard sedan differentials to heavy-duty dually truck axles.

Light Duty Trucks

OEM 10-bolt and 12-bolt axles for Ford F-150, Silverado, and RAM 1500.

Heavy Duty / Dually

High-capacity Dana and AAM axles for 2500/3500 series towing trucks.

Muscle & Classic

Original rear ends for vintage RWD cars matched by housing width and ratio.

Quality Standards for Our Rear Axles

When you buy used rear ends online, ensure the supplier follows a strict quality protocol. Every Falcon Car Parts unit includes these features:

  • 1. Gear Ratio Match: We manually verify the ring gear count to guarantee a perfect 100% VIN match.
  • 2. Backlash Verification: We check the play between the ring and pinion to ensure quiet operation.
  • 3. Pinion Seal Audit: We verify the front seal is dry and the yoke has no excessive play.
  • 4. Straightness Check: The axle tubes are inspected for any bends that could cause tire wear.
  • 5. Internal Fluid Scan: We check the gear oil for metallic particulates or moisture contamination.
  • 6. Direct VIN Matching: Our specialists verify your exact VIN to guarantee 100% fitment.

Common Questions About Buying Used Rear Axles

Prices typically range from $450 to $1,200. Heavy-duty truck axles with dually wheels or locking differentials are on the higher end. Falcon Car Parts offers wholesale pricing to save you 40-60% over new dealership parts.

Check the metal tag on your differential cover or the code on your door jamb sticker. If you are unsure, just provide us with your VIN, and our system will identify the exact ratio your vehicle was built with.

Yes. Since complete rear ends are non-wear structural items, a tested used OEM axle is often superior to a remanufactured one that may use generic internal gears. We verify the internal health before shipping.

Howling is usually a sign of worn pinion bearings or an improper gear mesh. If the noise increases with speed, the axle assembly likely needs replacement to prevent a total lock-up.

Usually, yes. However, brakes are considered wear items. While we include the calipers, rotors, or drums that come on the unit, we recommend doing a full brake service before installation for safety.

We perform a spin-test on a lift or bench to listen for bearing noise. We also inspect the fluid for metallic debris which would indicate gear failure.

An open differential sends power to the wheel with the least resistance. An LSD (like Positraction) helps both wheels gain traction. We verify your vehicle's specific type using the VIN.

While the rear end might look similar, the ratios must match the front differential on 4WD models. We guarantee the ratio matches your factory specs perfectly.

Yes! Visit our facility in Clifton, NJ for same-day local pickup. Since these are very heavy, we will help you load the unit into your truck or trailer.

We ship rear axles via LTL freight on custom-built pallets. We use heavy-duty steel banding and protective wrap to ensure the unit stays secure and the axle tubes are not bent during transit.