Get a Steering Rack Quote

Direct wholesale pricing, fast response.
Certified Handling Components

The Best Way to Buy Steering Racks Online

Searching for a "steering rack and pinion near me"? We provide tested, OEM-quality steering assemblies delivered directly to your home or shop in New Jersey and nationwide.

Pressure Verified

Guaranteed zero leaks on all hydraulic units.

Direct VIN Match

100% fitment guarantee for your specific year and model.

Technical inspection of a used OEM steering rack and pinion assembly

Trusted Source for High-Quality Steering Racks

A failing steering rack compromises your safety and driving comfort. Falcon Car Parts is the industry leader for used steering rack and pinion assemblies for sale, providing professionally audited OEM units that restore factory-spec precision to your vehicle's front end.

Every used steering assembly in our inventory undergoes a rigorous inspection of the inner tie rods, bellows boots, and mounting bushings. We pressure-test all hydraulic ports to ensure a leak-free installation before it is cleared for shipping.

  • Hydraulic Audit: Verified seal integrity under high-pressure steering loads.
  • OEM Reliability: Genuine manufacturer parts from 1950 to 2026.
  • Smooth Travel: Lock-to-lock verification for binding-free operation.

Looking for Used Steering Racks Near NJ?

Based in Clifton, New Jersey, Falcon Car Parts provides the fastest delivery times for used steering racks in NJ and the surrounding Tri-State area. Whether you are in Newark, Jersey City, or Paterson, we offer specialized local support and rapid shipping.

Skip the expensive dealership markup—get a certified, high-performance OEM steering assembly with a nationwide warranty right here.

NJ Local Shipping

Fastest delivery to NJ, NY, and CT!

We Stock Replacement Racks for All Systems

From traditional hydraulic assist racks to modern electric motor-driven (EPS) assemblies.

Hydraulic Units

OEM fluid-driven racks for millions of domestic and import passenger vehicles.

Electric Steering (EPS)

Integrated motor and module assemblies for modern fuel-efficient cars and SUVs.

Truck & 4x4 Racks

Heavy-duty steering mechanisms for Ford F-150, Chevy Silverado, and RAM trucks.

Quality Standards for Our Steering Racks

When you buy used steering racks online, ensure the supplier follows a strict quality protocol. Every Falcon Car Parts unit includes these features:

  • 1. High-Pressure Seal Test: We verify the pinion and end-seals hold pressure without weeping.
  • 2. Gear Tooth Audit: We ensure the rack bar and pinion gear have zero chipped or worn teeth.
  • 3. Pinion Shaft Inspection: The input shaft splines are checked for clean, non-rounded threads.
  • 4. Boot & Bellows Scan: Rubber boots are inspected for dry rot or impact tears.
  • 5. Bushing Integrity: Mounting points are checked for firmness to ensure the rack won't shift under load.
  • 6. Direct VIN Matching: Our specialists verify your exact VIN to guarantee 100% fitment.

Common Questions About Buying Used Steering Racks

Prices typically range from $150 to $450. Modern Electric Power Steering (EPS) units with built-in motors are generally more expensive than standard hydraulic models. At Falcon Car Parts, we offer wholesale pricing to save you 60% or more over new part prices.

Common signs include puddles of fluid under your car, a heavy steering wheel that is difficult to turn at low speeds, or a wandering feeling on the highway where the car doesn't stay centered in the lane.

Yes. Since OEM racks are built with high-quality alloys and hardened steel gears, a tested used unit is often more reliable than a low-quality 'generic' remanufactured part. We pressure-test every hydraulic unit before it leaves our warehouse.

Yes, an alignment is mandatory. Replacing the rack alters the tie rod lengths and the steering geometry. Driving without an alignment will cause uneven tire wear and potentially trigger traction control warnings.

Our racks come with the inner tie rods attached. While used outer tie rod ends may be included, they are wear items. We always recommend installing new outer ends for the best steering performance.

We utilize a specialized hydraulic bench to verify the rack holds pressure under load. We also perform a manual gear lash test to ensure the pinion and rack bar mesh tightly with zero 'slop.'

This is usually caused by the steering column coupler being one or two splines off on the pinion shaft. A professional alignment technician will center the wheel by adjusting the tie rod ends correctly.

Steering racks vary by engine size and wheel package. We use your VIN to guarantee you receive the correct rack with the proper gear ratio and mounting locations for your specific car.

Yes! Visit our facility in Clifton, NJ for same-day local pickup. These are long, heavy parts, and local pickup is a great way to save on shipping costs.

Steering racks are shipped in reinforced, double-walled boxes. We use custom cardboard supports to suspend the unit, ensuring the tie rods and pinion shaft don't take any impact during transit.