Will the color match my vehicle's paint?

We use your VIN to match the factory paint code. While sun exposure over time can cause minor fading differences, a used OEM part is the best way to ensure the closest possible color and texture match.

Are used OEM mouldings better than aftermarket ones?

Yes. OEM mouldings are made of higher-grade plastics and use UV-resistant paints that match factory specs. Aftermarket versions often warp in the heat or have wavy edges that do not line up with your door.

Can I install the moulding myself?

Yes. Most mouldings use a simple snap-on system. We recommend cleaning the door surface with rubbing alcohol and using high-quality 3M automotive adhesive tape if your vehicle requires it for a permanent bond.

What is the Wheel Arch moulding vs the Door moulding?

The door moulding sits on the flat panel of the door. The wheel arch moulding (fender flare) curves around the tire. Some rear doors have a small piece of the wheel arch attached to the edge; we verify this via VIN.

Why is my chrome trim pitting?

Pitting is caused by road salt and environmental chemicals. We only inventory Grade-A used parts with smooth, reflective chrome finishes and zero pitting or bubbling.

Can I pick up a moulding in Clifton, NJ?

Absolutely! Visit our facility for same-day local pickup. We keep a wide variety of door guards and side trim in stock for most major makes and models.

How do you ship long trim pieces?

Rear door mouldings can be fragile. We ship them in reinforced, oversized boxes with structural padding to ensure they do not snap or warp during transit.

Get a Rear Moulding Quote

Direct wholesale pricing, fast response.

Precision Body Trim

The Best Way to Buy Rear Door Mouldings Online

Searching for "door moulding near me"? We provide tested, OEM-quality replacement side guards and trim delivered directly to your home or shop in New Jersey and nationwide.

VIN Matched

100% fitment guarantee on every trim piece.

Finish Matched

Verified texture and color codes for your specific trim.

Quality inspected used rear door side moulding guard

Trusted Source for High-Quality Door Mouldings

When your car's side profile is marred by missing or scuffed trim, Falcon Car Parts is the industry leader for used rear door mouldings for sale. We understand that side-impact aesthetics and paint protection are vital, which is why we prioritize clip integrity and structural inspection.

Every used rear door moulding in our inventory is carefully inspected for warping, UV fading, and tab functionality before it is packed for shipping.

Tab Integrity: Every mounting hook is verified to be intact.
OEM Quality: Genuine manufacturer parts from 1950 to 2026.
Secure Logistics: Safely packed to prevent warping or snapping during transit.

Looking for Used Rear Door Mouldings Near NJ?

Based in Clifton, New Jersey, Falcon Car Parts provides the fastest delivery times for used rear door mouldings in NJ and the surrounding Tri-State area. Whether you are in Jersey City, Newark, or Paterson, we offer specialized local support and rapid shipping to your door.

Skip the expensive dealership markup—get a certified, high-performance OEM moulding with a nationwide warranty right here.

NJ Local Shipping

Fastest delivery to NJ, NY, and CT!

We Stock Used Side Trim for All Brands

Our nationwide network allows us to find the specific side guard you need, even for rare models.

Domestic Trucks & SUVs

Ford Expedition, Chevy Tahoe, Jeep Grand Cherokee, and more.

Imported Reliability

Honda CR-V, Toyota RAV4, Nissan Rogue, and others.

Luxury & Performance

BMW X5, Audi Q7, Lexus RX, and Mercedes-Benz GLE Class.

Quality Standards for Our Door Mouldings

When you buy used door mouldings online, ensure the supplier follows a strict quality protocol. Here are the essential features included with every Falcon Car Parts unit:

1. Mounting Tab Audit: We manually inspect every clip slot to ensure the trim will sit flush against the door.
2. Warp Verification: Each piece is checked on a flat surface to ensure the arch hasn't bent out of shape.
3. UV Finish Audit: We verify the plastic hasn't turned white or chalky from sun exposure.

4. Finish Uniformity: We check for paint-match consistency or texture grain parity for a seamless look.
5. Edge Rash Review: Surfaces are checked for deep gouges or impact stress from door-to-door contact.
6. Direct VIN Matching: Our specialists verify your exact VIN to guarantee a 100% direct fitment match.

Common Questions About Buying Used Rear Door Mouldings

Used OEM rear door mouldings typically range from $35 to $110. The price varies based on the vehicle's trim level, such as whether the part is textured black, chrome-accented, or body-color painted. At Falcon Car Parts, we provide competitive wholesale pricing to help you save significantly over new dealership replacements.

Sides are determined from the driver's perspective while sitting inside the car. The Left side is the Driver's Side, and the Right side is the Passenger's Side. We verify this during our VIN matching process to ensure you get the correct side for your rear door.

We use your VIN to match the factory paint code. While sun exposure over time can cause minor fading differences on your vehicle, a used OEM part is the best way to ensure the closest possible color and texture match compared to unpainted aftermarket alternatives.

Peeling is usually caused by failing adhesive tape or broken plastic clips due to impact or age. If the moulding itself is warped, it will continue to pull away from the door panel. Our inspected units are checked for straightness to ensure a flush, long-lasting fit.