How much does a used fender moulding cost?

Used fender mouldings typically cost between $45 and $150 per piece. Prices vary based on the vehicle make, whether the trim is textured plastic or painted, and if it includes integrated sensor holes.

Is fender moulding the same as a fender flare?

Yes, they are often used interchangeably. Fender moulding typically refers to the slim trim piece on the wheel arch, while 'flare' often refers to wider pieces found on trucks and SUVs.

Do you check for broken mounting clips on the back?

Absolutely. This is our primary inspection point. We verify that the plastic mounting channels and clip-holders on the backside are 100% intact so the trim sits flush against the body.

Will the used moulding match my car's paint color?

We match based on your factory paint code. For unpainted textured trim, we ensure the black or gray plastic is not sun-bleached or 'grayed out' to maintain a uniform look.

Does the moulding include the plastic clips?

We include any clips that survived the removal process. However, because these clips are designed to break upon removal, we always recommend purchasing a small pack of new OEM clips for the most secure installation.

Are used mouldings scratched or scuffed?

We perform a cosmetic audit. We reject units with deep gouges or heavy road rash. Minor surface marks common with road use may be present but are generally buffable or unnoticeable once installed.

How do I know if I have textured or smooth-painted moulding?

Textured trim has a rough 'orange peel' feel and is usually raw plastic. Smooth trim is color-matched to the body. We use your VIN to verify the exact trim level and finish your car requires.

Are front and rear fender mouldings the same?

No. Every wheel arch has a specific curvature. You must specify the position (Front Left, Front Right, Rear Left, or Rear Right) when requesting your quote.

What causes fender mouldings to fall off?

The most common causes are brittle plastic clips, light impacts that dislodge the fasteners, or adhesive failure on older models that use double-sided tape in addition to clips.

How fast is shipping to NJ for exterior trim?

For NJ customers, we offer 1-day shipping or local pickup from our Clifton facility. We box these carefully with long-format packaging to prevent the plastic from snapping during transit.

Get a Moulding Quote

Direct wholesale pricing, 100% VIN matched.

Inspected Exterior Trim

The Best Way to Buy Fender Mouldings Online

Missing trim or faded flares? We provide fully audited, cosmetic-grade OEM fender mouldings that are guaranteed to snap perfectly into place. Fast shipping to NJ and nationwide.

Clip-Tab Verified

Each piece is checked to ensure the underside mounting slots are not cracked or broken.

UV Protected

We source trim with minimal sun-fading to ensure a deep, factory-fresh finish.

Tested used fender moulding flare with intact mounting tabs and clean surface

Genuine OEM Fender Flares for All Makes

Fender mouldings do more than add style; they protect your wheel arches from debris and moisture. At Falcon Car Parts, we specialize in providing genuine used fender mouldings that offer the exact texture and curvature of your vehicle. Why settle for aftermarket trim that gaps or warps in the heat?

Every used wheel arch trim we ship is salvaged from low-mileage vehicles. Our technicians verify the color code for painted units and ensure the texture matches for off-road models, providing you with a seamless cosmetic repair.

Structural Audit: Verified free of warping or twisting.
Finish Quality: We reject units with deep gouges or peeling clear coat.
Fitment Guarantee: Precise matching for your specific trim package.

Fast Delivery for Exterior Trim in NJ

Based in Clifton, NJ, Falcon Car Parts is your local source for used fender flares in New Jersey. We understand that a missing piece of trim makes your vehicle look unfinished, which is why we offer expedited processing and flat-pack shipping for all moulding components.

Serving Newark, Jersey City, Paterson, and the entire Tri-State area with reliable, tested OEM replacement parts.

Next-Day NJ Delivery

Get your vehicle's look restored fast with local NJ shipping!

Mouldings for Every Vehicle Style

From sleek sedan wheel arch trim to rugged wide-body SUV flares.

Textured Plastic

Durable, unpainted raw plastic trim found on many SUVs and off-road packages.

Color-Matched Paint

Smooth-finish mouldings painted to match your vehicle's exact factory paint code.

Sensor-Ready Flares

Mouldings with precision-cut holes for park assist sensors and side reflectors.

Our 6-Point Quality Check for Fender Moulding

Cosmetic perfection is our standard. Every used piece of trim passes this inspection:

1. Mounting Tab Audit: We inspect every plastic slot to ensure it can hold a clip securely.
2. Straightness Test: We verify the plastic hasn't warped or bowed due to heat exposure.
3. Edge Quality Check: The perimeter edges are inspected for nicks or separation.

4. Texture Consistency: For raw plastic, we ensure the finish is even and not blotchy.
5. Clear Coat Inspection: Painted units are checked for peeling or UV-related bubbling.
6. VIN Option Verification: We match sensor holes and trim width to your specific vehicle model.

Common Questions About Buying Used Fender Mouldings

Used fender mouldings typically cost between $45 and $150. Prices vary depending on the vehicle make and whether the trim is textured plastic or painted body-color.

Yes. On many cars, they are the same piece. Flares are typically wider and found on trucks or SUVs, whereas mouldings are narrower accent pieces for sedans.

Yes. We manually inspect the back of every piece. We reject any moulding with broken plastic tabs or clip-holders to ensure a flush, factory fit.

We use your factory paint code to find the best match. For raw plastic trim, we ensure it isn't faded or bleached out by the sun.

We ship any clips that stayed with the part. However, since these clips often break during disassembly, we recommend buying a set of new clips for your installation.

We reject mouldings with deep gouges or heavy scuffs. Minor 'road wear' is normal for used parts, but we source only the cleanest available units for our inventory.

Textured trim is raw, dark gray or black plastic. Smooth trim is color-matched. We use your VIN to confirm which one your vehicle was equipped with at the factory.

No. They have different lengths and curves to match the specific wheel arch. We verify the side (Left/Right) and position (Front/Rear) before shipping.

Plastic clips becoming brittle with age is the main cause. Replacing your missing moulding with an OEM part ensures the mounting geometry is exactly as the factory intended.

For NJ customers, we offer 1-day shipping or local pickup from our Clifton facility. We process trim orders quickly to help you get your car looking great again.